Portable Conductivity Meter or DDS Meter.

PH Meter, DDS Meter, TDS Meter, Multipara Meter.

A & E Lab.

Main Products: Atomic Absorption Spectrometer (AAS), Fluorescence Spectrophotometer, Bio-Spectrophotometer, UV Vis Spectrophotometer, Visible Spectrophotometer, Flame Photometer, Whiteness Meter, Turbidity Meter, Colorimeter, Gloss Meter, Tintometer, Automatic Polarimeter, Auto Melting Point Apparatus, Automatic Refractometer, Abbe Refractometer, PH/DDS/TDS Meter, etc.

CONscan series Waterproof Pocket Conductivity Tester

CONscan series waterproof pocket conductivity tester include the CONscan20, 30 and 40. The meters are used to measure electrical conductivity value of liquids without temperature compensation function.

Applications:CONscan20 is used to measure low conductivity liquids. 

    E.g. Pure water, Distilled water etc.CONscan30 is used to measure general conductivity liquids.

    E.g. Tap water, Table-water etc.CONscan40 is used to measure high conductivity liquids.

     E.g. Waste water, Salt water etc.

Single Point Push-Button Calibration:CONscan series with one point calibration function. The meter is permitted to use user-defined calibration solution, you need only set conductivity value in meter and immerse the electrode into standard solution, then press CAL key, the meter will be calibrated automatically.

Hold Function:The meter with hold function, press HOLD key, you can freeze reading temporarily for easy viewing.

Replaceable Electrode:CONscan series with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily.

Auto-Power Off:CONscan series will turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use.

Waterproof Function:The meter with good waterproof performance, It can float on water.

Specifications:

Model	CONscan20	CONsan30		CONscan40
Conductivity Range	0.0~199.9uS/cm	0.0~1999uS/cm		0.00~19.99mS/cm
Conductivity Accuracy	±1% F.S
Resolution	0.1uS/cm	1uS/cm		0.01mS/cm
Calibration Points	1 point (Digital, push-button)
Calibration Solutions	146.6uS/cm		1408uS/cm	12.85mS/cm
Temp. Coefficient	2%/oC
Auto-Power Off	8 minutes after last key pressed
Hold Function	Yes
Non-Volatile Memory	Yes
Operating Temp.	0-60°C
Power Requirement	3×1.5V alkaline button cell batteries
Battery Life	Approx. 150 hours
Dimension & Weight	180(L)mm×30(Dia.)mm & 85g

Portable Conductivity Meter or DDS Meter.